imei repair
Gurubumuzda paylaşılan çözümlerden haberdar olmak için Guruba katılın·
Grubumuza sende Katıl
Cep Telefonu Tamir destek Paylaşım Topluluğu
 

Octoplus Box Samsung GT-P7510 Help

on | 0 yorum

Samsung GT-P7510 (Galaxy Tab)

1. Available operations
2. Necessary drivers
3. Write Firmware
4. Reset Screen Lock
5. Download Mode
6. FAQ

1. Available operations

  1. Read Info;
  2. Write Firmware;
  3. Reset Screen Lock.
Back to main menu

2. Necessary drivers

For correct work with the phone install "SAMSUNG USB Driver for Mobile Phones" driver.

Back to main menu

3. Write Firmware

  1. Put phone into Download Mode.
  2. Connect the phone to PC via cable.
  3. Install required driver.
  4. Select firmware file.
  5. Click "Write firmware" button.
  6. Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Back to main menu

4. Reset Screen Lock

  1. Connect powered-on phone to PC via cable.
  2. Install necessary driver.
  3. Click "Reset Screen Lock" button.
  4. Follow software instructions (prompts).
Note: After the operation will be successfully completed, You need to draw any pattern, if Pattern Lock was set, or enter any password, if Password Lock was set.
Back to main menu

5. Download Mode

To enter emergency mode, power off device (press and hold power until device off), press and hold "Volume down"+"Power" buttons.
Back to main menu

6. FAQ

Q: My phone not found by program. How can I configure my phone?

A: Provide following steps:
  1. Disconnect USB cable from phone (if connected).
  2. Go to Menu->Settings->Applications->Development.
  3. Turn on "USB Debugging" option.
  4. When message is appear press "Yes".
  5. Press "Read Info" in Octopus Samsung software.

Back to main menu


DEVAMI>>
Categories : , , , , , , , ,

0 yorum:

Yorum Gönder

YORUMA CEVAP VEREMEYEBİLİRİZ HIZLI CEVAP ALMAK İÇİN
imei repair GRUBUMUZA KATILABİLİRSİNİZ.
https://www.facebook.com/groups/2564106410501110/